Diopter/Close-Up Filter Test

Had a play with something interesting? Got something that we all covet? Found a real lemon? Write a few lines about it, and share your experiences.

Moderator: Moderators

Forum rules
Please ensure that you have a meaningful location included in your profile. Please refer to the FAQ for details of what "meaningful" is.

Diopter/Close-Up Filter Test

Postby olrac on Fri Jul 01, 2005 11:02 am

I received my hoya close up filter set yesterday it includes the following filters

+1
+2
+4

I also purchased a +3 as well.

I decided to test these little buggers out last night so i took photos on an apple on my coffee table.

the results are here....
http://www.pixspot.com/thumbnails.php?album=524

For the first half of the test was just focusing on any part of the apple and it is a little distracting when you look at them in sequence.

the second half is better where i am trying to focus on the base of the stem.

Just a note with each increase in magnification the working distance became closer so by the end I had move the camera about an inch closer to the apple than when i had started.

Well let me know what you think.
User avatar
olrac
Member
 
Posts: 427
Joined: Wed Jun 08, 2005 2:16 pm
Location: Richmond - VIC

Postby avkomp on Fri Jul 01, 2005 1:47 pm

they get you up close and personal, I find that it is hard to tell how good your lenses are photographing an apple though. the shine can hide detail.

When I got mine (nikon 5T) I was trying to figure out maximum sizes, depth of field etc using common things I had at hand when a friend walked past and asked me what I was doing. When I explained, he said why dont you just photograph a ruler??

This really hadn't occured to me at all and made so much sense that I dug out an engineers rule I had and photographed it.
I had it perpendicular to the lens axis to determine closest reproduction ratios and I put it at 45 degrees to lens axis and focused on a point midway along the ruler so I was able to get a good idea of depth of fields that I could expect using different apertures.

finally, because the ruler is square and even, I could determine any distortions I might introduce.

The ruler I used had good texture, scratches etc and was matt finished so no shine to hide details. Of course I used the tripod for repeatability between test shots.

regards Steve
User avatar
avkomp
Senior Member
 
Posts: 2485
Joined: Sun May 29, 2005 8:47 pm
Location: Bendoura NSW - Nikon D5

Postby SteveGriffin on Fri Jul 01, 2005 4:15 pm

What lens were you using??
Steve
-------------------------------------------------------
So many things to do - so little time.
User avatar
SteveGriffin
Senior Member
 
Posts: 815
Joined: Tue Feb 22, 2005 6:52 pm
Location: Rochedale Brisbane

Postby avkomp on Fri Jul 01, 2005 4:34 pm

I am using a nikon 5t close up lens.
this is 62mm and I use it on my 300mm nikon enthusiasts kit lens
I used part of my 200 cashback from maxwells to get that.
ordered from the states for around $40 aud on my doorstep.
Steve
User avatar
avkomp
Senior Member
 
Posts: 2485
Joined: Sun May 29, 2005 8:47 pm
Location: Bendoura NSW - Nikon D5

Postby olrac on Fri Jul 01, 2005 7:14 pm

I was using the kit lens,

The ruler Idea is gold I am going to have to dig one out to give it a go...

Well there is something to do after the wife goes to bed
User avatar
olrac
Member
 
Posts: 427
Joined: Wed Jun 08, 2005 2:16 pm
Location: Richmond - VIC

Postby avkomp on Fri Jul 01, 2005 8:00 pm

my face was like homer simpsons when my friend said just use a ruler d'oh!! I had planned to use coins or anything at hand and maybe measure them afterwards!! but now I just look at my pictures and everything I need is right there.

sometimes you just dont see the wood for the trees.
Steve
User avatar
avkomp
Senior Member
 
Posts: 2485
Joined: Sun May 29, 2005 8:47 pm
Location: Bendoura NSW - Nikon D5

Postby olrac on Fri Jul 01, 2005 10:31 pm

I am going to do the same thing with a ruler stay posted.....
User avatar
olrac
Member
 
Posts: 427
Joined: Wed Jun 08, 2005 2:16 pm
Location: Richmond - VIC


Return to Equipment Reviews

Who is online

Users browsing this forum: No registered users and 7 guests